Seat with Base Plate for EMOVE Touring


Official seat for EMOVE Touring, includes the following 

  • Base Plate
  • Locking mechanism
  • Seat rest
  • Hydraulic tube
  • 2x M6 45mm Screws
  • 2x M6 30mm Screws
  • 1x Mini Screw

Only suitable for Touring ship after July 2020.

Installation Options:

Installation Option (DIY):
Easy installation guide provided, simply follow the guide to install the seat.

Install for you option: Do note that this installation DOES NOT INCLUDE the full installation. It ONLY includes installation of the base plate which is the most difficult part of the installation. (With the full seat installed, it cannot be shipped, therefore this installation only includes the base plate)

Disclaimer: Please follow the above instructions when installing the seat. The screws need to be placed at the right drill holes. Putting it inside the wrong holes will risk breaking your screws and VORO MOTORS, Inc. cannot be held responsible for that.

Compatible with

Unlimited Service Support

We believe in providing you with the best support available. Need some help installing some new parts or conducting maintenance? Check out our FAQ on each scooter model. You can also choose to chat with us live, email us, or call us.

Worldwide Shipping

Wherever you are located, we will do our best to find a way to ship your scooter, accessories, and spare parts to you. Read more about our shipping policies.

Repairs & Servicing

We understand that sometimes it is a pain to conduct repairs and maintenance on your own. This is why many of our riders choose to let us help them insetad. Find out more about our repair and maintenance services.

Customer Reviews

Based on 4 reviews
Larry W.
More in stock

Looking for a tubeless 8" tire for the E moving touring scooter

Robert Mcvae

I Love The Seat To My Emove Touring Scooter

Bryan Lo
Seat for Emove Touring

Assembly was straight forward but construction features for a simple seat was too ambitious. The base is solid holding the bottom base post. However the base post holding the seat post needed to be tighten so much that I was afraid that I would break the quick release clip. If it wasn’t tightened up super-tight then the seat would slide down to about a foot off the deck. From the seat post to the seat, the quick release that allows the seat to tilt is nice and is firm but not required for my purposes. Seat is very comfy and cushiony.

Robert Pea
Nice seat

I found it to be comfortable.